Payment & Shipping Terms:
|Relay Rating:||10 Amps Incandescent, 5 Amps Fluorescent, 16 Amps Resistive, 0.5 HP @ 240 Volts AC (per Channel)||NET:||(2) 4-pin 3.81mm Detachable Terminal Blocks, Paralleled|
|NET ID:||(3) 7-Segment Green LED Digits And (2) Miniature Pushbuttons For Setting DC-NET ID; Digits Also Display Output Levels||PWR:||(1) Green LED, Illuminates When DC Power Is Applied To The NET Port|
|DC-NET Power Usage::||5 Watts (0.20Amps @ 24 Volts DC)||Heat Dissipation:||20 BTU/hr|
led light control module,
interior lamp control module
8-Channel Mutiple Protocols DC-NET Smart Lighting Control Switch
The DIN-REL8 is an 8-channel lighting control module designed to support switching of non-dimmable lighting and fans. A single model supports both 120 and 220-240 Volt applications. Each channel handles incandescent loads up to 10 Amps, fluorescent loads up to 5 Amps, and also 1/2 HP motors. Supports multiple controlling protocols such as DMX, ModBus RTU, ModBus ASCII, and third-party protocols Neon/Cold cathode, fluorescent, motors. Our products are extensively applied in Hotel lighting, outdoor lighting.
Control & Indicators
Indicator light & button
|(8) Red LEDs and (8) miniature pushbuttons for status indication and local control of each channel|
(3) 7-Segment green LED digits and (2) miniature pushbuttons for setting DC-NET ID; digits also display output levels
|(1) Green LED, illuminates when DC power is applied to the NET port|
(1) Yellow LED, indicates communication with the control processor
(1) Press "RESET" pushbutton will reset the processor, which located in interior
|(8) sets of (2) captive screw terminals; Isolated Class 1 SPST relay switch circuits 1 - 8|
10 Amps incandescent, 5 Amps fluorescent, 16 Amps resistive, 0.5 HP @ 240 Volts AC (per channel)
(2) 4-pin 3.81mm detachable terminal blocks, paralleled
|OVERRIDE:||(1) 2-pin 3.81mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present;|
DIN Rail Installation
The DIN-REL8 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw
terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-REL8's front panel stays accessible while the connections are concealed.
1. What is intelligent lighting control system?
A lighting control system is an intelligent network based lighting control solution that incorporates communication between various system inputs and outputs related to lighting control with the use of one or more central computing devices. Lighting control systems are widely used on both indoor and outdoor lighting of commercial, industrial, and residential spaces.
2. What is the advantage compare with the traditional lighting control?
Improve energy efficiency
Reduce maintaince cost
Easy operation and more convenient
3. What Okystar can supply for you?
Okystar can offer a whole solution of lighting control system for you, economic and customization, with industrial-grade design, product architecture in line with international electrical standards, using high-quality components, products are stable and reliable.
Contact Person: coco