Payment & Shipping Terms:
|Product Name:||4 Channels Of 1.5A Volt Dimming Control||Working Temperature:||32° To 104° F (0° To 40° C)|
|Working Humidity:||10% To 90% RH (non-condensing)||Maximum Per Channel:||1.5 Amps @ 120 To 240 Volts AC, 50/60 Hz|
|Input Voltage:||120 To 240 Volts AC, 50/60 Hz||Size:||143*98*68mm|
led light control module,
daytime running light control module
Description of 4-Channel Forward Phase Dimmer:
The DIN-DM4 is a 4-channel universal lighting control module
designed to support dimming of both forward and reverse phase
A single model supports 4-way 1.5A dimming, each channel can
control 330W load independently , 2 or more channel combining
power output at optional, maximum 6A (1300W) combining
Built-in OCP (over current protection),when the actual load power of
channel exceeds the rated power, the module automatically closes
Over-temperature protection, when the module’ s temperature is
over the maximum working temperature, it will shut off all the channel output automatically and recover the channel output till It drops
below the maximum working temperature.
Emergency manual switch helps you test easily. Operating state
indicator lamps help you check operating state clearly.
With 1-way Bus input port, 1 way Bus output port and 1 way forced
DC-NET ID number digital display is on the front panel of the
device . the ID number can be set via the panel keys.
DC-NET Bus communication, different controlling ways include PC
tablet mobile phone control panel sensor,etc.
It is compatible with RS-485 Bus communication, supports multiple
controlling protocols such as DMX, ModBus RTU, ModBus ASCII,
and third-party protocols, supporting AMX, Crestron, C4 and all
third-party control systems.
Able to change communication baud rate settings (4800, 9600,
19200, 38400, 115200)
Each channel independent dimming operation controlling ; support
dimming fade-in fade-out effect, fade-out time is adjustable from 0
seconds ~ 255 seconds; it supports each channel dimming curve
configuration ,user-defined editing and the tone light curve saving;
loop power-off storage, recovery, scene saving,and call functions,etc.
SPECIFICATIONS of Dimmer Module:
|NET ID: (3) 7-Segment green LED digits and (2) miniature pushbuttons for setting DC-NET ID; digits also display output levels|
|PWR: (1) Green LED, illuminates when DC power is applied to the NET port|
|NET: (1) Yellow LED, indicates communication with the control processor|
|RESET: (1) Recessed miniature pushbutton, resets internal processor|
|LOADS 1 – 4: (8) Red LEDs and (8) miniature pushbuttons for status indi-cation and local control of each channel|
Controls & Indicators:
Information Display:128*64 LCD display, display system configuration and status information
PWR:(1) Green LED, illuminates when DC power is applied to the NET port
NET:(1) Yellow LED, Indicates communication with an external control processor
BUTTON 1 – 6: (8) miniature pushbuttons for local control of devices
Different package at optional:
1. Retailing Package:Paper Package
2. Bulking Packing:Colorful Package
3. Retailing Box package design according to your requirement( Order > 1000PCS)
1. What is intelligent lighting control system?
A lighting control system is an intelligent network based lighting control solution that incorporates communication between various system inputs and outputs related to lighting control with the use of one or more central computing devices. Lighting control systems are widely used on both indoor and outdoor lighting of commercial, industrial, and residential spaces.
2. What is the advantage compare with the traditional lighting control?
Improve energy efficiency
Reduce maintenance cost
Easy operation and more convenient
3. What Okystar can supply for you?
Okystar can offer a whole solution of lighting control system for you, economic and customization, with industrial-grade design, product architecture in line with international electrical standards, using high-quality components, products are stable and reliable.
Contact Person: coco