|
Product Details:
Payment & Shipping Terms:
|
| Dimmer Channels: | 4 | Maximum Per Channel: | 5 Amps @ 120 To 240 Volts AC, 50/60 Hz |
|---|---|---|---|
| OUTPUT 1 – 4: | (2) 4-pin 3.81mm Detachable Terminal Blocks Comprising (4) Isolated Dimming Control Outputs | Voltage Control Range: | 0 To 10 Volts DC |
| Maximum Wire Size: | 12 AWG (2.5 Mm²) | DC-NET Power Usage: | 2.5 Watts (0.1 Amps) @ 24 Volts DC |
| High Light: | remote lighting control system,commercial lighting control systems |
||
0-10V Dimming Controller Supoorts 4 Isolated Ports For Smart Lighting Control System
Description of 0-10v Dimmer in Smart Lighitng Control System
The DIN-FLV4 is a 4-channel lighting control module designed to dim 0-10 Volt drivers and ballasts. A single model supports both 120 and 220 to 240 Volt applications. The DIN-FLV4 may also be used for switching of non-dimmable lighting loads up to 5 amps and 1/2 HP motors.
Connections
| OUTPUT 1 – 4 | (2) 4-pin 3.81mm detachable terminal blocks comprising (4) isolated dimming control outputs |
| Voltage Control Range | 0 to 10 Volts DC |
| Maximum Sink Current | 100mA per channel |
| CONNECTOR | (4) sets of (2) captive screw terminals; Isolated Class 1 SPST relay switch circuits 1 – 4 |
| Relay Rating | 5 Amps maximum per channel |
| Maximum Wire Size: | 12 AWG (2.5 mm²) |
| NET | (2) 4-pin 3.81mm detachable terminal blocks, paralleled; DC-NET slave port |
| OVERRIDE: |
(2) 2-pin 3.81mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum Closure Rating: 10mA (per module) at 24 Volts |
Override Input
An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel or remotely via software.
DC-NET
DIN Rail Installation
The DIN-FLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-FLV4’s front panel stays accessible while the connections are concealed.
An Applied example of 0-10V Dimmer
Different packing at optional:
1. Retailing Packing:
Neutral Carton Package
2. Bulking Packing:
Carton Package-Can save packing cost
Anti-static bag--Can protect electronic components from potential electrostatic hazards
3. Customized Packing
Can design and pack according to your requirement,such as colorful box,blister packing,sealed packing with your company information, bar code,ect. ( Discuss extral)
FAQ:
1. What is intelligent lighting control system?
A lighting control system is an intelligent network based lighting control solution that incorporates communication between various system inputs and outputs related to lighting control with the use of one or more central computing devices. Lighting control systems are widely used on both indoor and outdoor lighting of commercial, industrial, and residential spaces.
2. What is the advantage compare with the traditional lighting control?
Improve energy efficiency
Reduce maintenance cost
Easy operation and more convenient
3. What Okystar can supply for you?
Okystar can offer a whole solution of lighting control system for you, economic and customization, with industrial-grade design, product architecture in line with international electrical standards, using high-quality components, products are stable and reliable.
Contact Person: coco
Tel: 86-755-23578860
Fax: 86-755-23578860
